PMC BB5-Ci, Руководство пользователя

Страница: 19 / 32

As the can be mounted vertically or horizontally, firstly choose which
orientation you require and select the corresponding side of the large printed
card template included within the packing.
Position the template in the desired point on the wall ensuring it is level.
The dotted lines denote the horizontal and vertical centres of the .
This will ensure accuracy if you are attempting to place the cabinets centrally,
adjacent or under a screen.
Mark the wall through the template using the six points denoted by crosses.
These correspond identically to the holes in the wall mounting plates.
Drill the holes in the wall at least 45mm deep. Insert the six plastic wall plugs and
screw the plates to the wall using the six long screws.
The cabinet can be mounted in vertical or horizontal positions. This will determine
to which top edge the plates will be best attached. (See the Positioning section
of the manual for details) There are small pilot holes positioned 30mm from the
edges of the cabinet to locate the four short screws that attach the adjustable
speaker plates to the cabinet.
Stick one of the soft adhesive feet in either bottom corners of the rear of the
cabinets approximately 30mm in from the edges of the cabinet.
Connect the loudspeaker cable to the . RED + / BLACK –
(See Connections section of the manual)
Locate the prongs of the wall plates with the speaker plates and slide the
down until it is securely fixed. If the is not perfectly level remove the
cabinet from the wall and adjust the levels of the speaker plates.
PMC has made efforts to provide accurate installation information and good quality fixings, PMC Ltd / PMC USA
LLC cannot be held responsible or liable for injuries or property damage - direct, indirect or consequential - arising
out of use or inability to use this product safely and properly.
8
7
6
5
4
3
2
1
loudspeaker user-guide
19
wall mounting the (cont...)