DOUBLE WIDTH ERECTION STEP
6
Step 11
: Fit diagonal braces
and toe board as shown.
Dismantling: - Reverse the steps of assembly.
Be sure to unlock the guardrail braces at the
end of the tower opposite the hatch platform
but leaving them in position. Then, return to
the seated position in the hatch platform
before unlocking the other ends and removing
the guardrail braces.
SINGLE WIDTH ERECTION STEP
Step 1
: Insert adjustable leg
with castor wheel into the
base of the ladder side
frame. Press down the
braking mechanism to lock
the castor.
Step 2
: Fit a horizontal brace
onto the vertical tube of the
frame, resting on the first
horizontal tube. Ensure the
brace trigger is facing to the
outside of the tower.
Step 3
: Fit the normal side
frame to the brace hook
resting on the opposite
horizontal rung. Fit the
second horizontal brace to
the horizontal tube as
shown. Level the base of
tower using spirit level and
make adjustment to the
adjustable leg until there is
no inclination from vertical.
Step 4
: Place 4 rung frames &
secure them with frame clips.
Fit diagonal braces as
illustrated.
Step 5
: Locate stabilizers to
each corners as shown and
ensure it touches the
ground.
Step 6
: Place hatch platform
as shown.
Step 7
: Using Through The
Trapdoor (3T) method,
position yourself in a sitting
position on the hatch
platform as shown and fit
4 horizontal braces.
Step 8
: Fit 4 rung frames as
illustrated.
