0000100435/060614/A FUA-1300/1800/2100/3000/4700 (50Hz)
EN
- 6
Fig. 4.1
A (x 4)
B (x 4)
Installing the fan on an MB-FUA-S1/S2
4.2.3 Installing the fan on an MB-FUA-C1/C2
For use on an extractor (UK or FlexMax
) or use with vehicle
exhaust extraction systems.
To install the fan on an
MB-FUA-C1/C2
bracket, proceed as
follows:
Fig. 4.2
• Use the mounting holes (A) and suitable hardware (not
supplied, material depending on wall type) to install the
bracket on the wall.
• Position the fan on the bracket.
• Tighten the bolts (B).
Fig. 4.2
B (x 4)
A
Installing the fan on
an MB-FUA-C1/C2
4.2.4 Changing the outlet position
The fan outlet can be positioned in various directions (see Fig.
4.3).
Fig. 4.3
Variable outlet position
To change the outlet position of the fan, proceed as follows:
Fig. 4.4
• Define the desired outlet position.
• If necessary, loosen the motor plate by unscrewing the
bolts (A).
• Turn the motor in the desired position.
• Tighten the bolts of the motor plate.
Fig. 4.4
A (x 6)
Changing the outlet position
4.2.5 Installing the fan directly on an arm
The
FUA-1300/1800/2100
can be used on the
KUA or
LM-2
extraction arm. In that case, no additional bracket is needed.
The necessary hardware is delivered with the arm.
To install the fan directly on the arm, proceed as follows.