Plymovent CONTROLPRO, Краткое руководство пользователя

Страница: 22 / 32

130519/A ControlPro | Short user manual EN - 22
!
Be aware that after a factory reset , imported language files will be deleted.
4.5 Lock mode | menu 5.7
To prevent unauthorized actions on the Homescreen, an option is to lock the Homescreen
with an extra password.
After Lock mode has been enabled, it is possible to lock the following functions on the
Homescreen:
- Start/stop fan
- Extra timer settings
- STOP
- Manual cleaning
The corresponding buttons will be dimmed and are not available anymore.
The physical buttons
11
on the Panel will be disabled as well.
To unlock the Homescreen a PIN is required. This is an extra PIN and differs from the PIN
needed, to Enter the Settings menu (refer to chapter 4).
Fig. 4.18 Lock mode for Homescreen
!
NOTE: Lock mode default PIN is 0000
11 Green button START/STOP FAN | Black button FILTER CLEANING
4.6 Backup | menu 5.5
To create a backup of the all settings or to restore a backup to the system follow the
backup procedure.
Fig. 4.19
• Connect a USB stick to the Panel
12 13
.
• Select Create backup
14
.
• Select OK.
When the backup is finished, the message Done appears.
• Remove the USB stick.
Fig. 4.19 Backup procedure
To restore a backup:
• Select Restore backup.
• Select OK.
12 The USB connector is located inside the Panel. Future development is to connect the USB to the HMI.
13 In case the USB stick is not recognized, the options Create backup and Restore backup are dimmed. Refer to
section 6.5 for the USB stick requirements.
14 By default Add serial number to filename is selected. Multiple backup files on the same USB stick are possible.