Pluto CIRCLE 0, Инструкция по эксплуатации

Страница: 9 / 14

Cleaning and Method
Clean regularly to prevent hygiene problems and product failures. In particular, keeping the waste bin, motor covers and
their motor surroundings clean will prevent from product failure.
Be sure to remove the power cord before cleaning.
Parts other than the motor cover(bottom) and the outer shell base(bottom) can be cleaned. Never clean the motor cover
(bottom) as it is equipped with a number of parts that use electricity, such as motors.
After cleaning, be sure to dry them thoroughly before using them. Using while moisture is remaining may cause water to
come into contact with the outer shell base(sensors, wires, etc.) and may lead to failure, causing unexpected accidents.
Washable parts Unable to wash
Outer shell Cover Litter box and Scoop Waste bin Motor cover
(Top)
Disassembly Method
Outer shell Cover
Lift and separate Outer shell Cover. Remove motor cover(top) and waste
bin. Slide the shaft into the litter box to
remove the shaft from the motor shaft
connection.
Shaft
Motor shaft connetion
Motor cover(Top)
Waste bin
Litter box Buckle
Lift out a litter box.
Undo the buckle, and then divide the
litter box up and down. Disassembling
the scoop is usually not required, but if
the scoop is replaced, proceed to the
next step.
Scoop
Screw cap
Unlock the screw cap to remove the scoop.
Be careful not to lose the spring in the shaft.
Motor cover(Bottom)
and Outer shell Base