Plustek P2-P42, Руководство пользователя

Страница: 13 / 78

9
4. Plug the rectangular end of the USB cable to an available USB port on your
computer.
5. If you plan to connect your scanner to a USB hub
3
, make sure that the hub is
connected to the USB port in your computer. Next, connect the scanner to the USB
hub.
Step 2. Installing the Software
1. Switch on the scanner power from the rear of the scanner.
2. If the USB components on your computer are functioning correctly, they will
automatically detect the scanner causing the Add New Hardware Wizard or
Found New Hardware Wizard to be launched.
Information
If your computer is off when the scanner is
connected, the “Add New Hardware Wizard”
message will not be displayed until the computer
is on and Windows starts.
3. For Windows XP:
a. Insert the Setup/Application DVD-ROM, included with your scanner, into your
DVD-ROM drive.
b. Select Install the software automatically recommended and click the Next
button.
c. Click the Next button in the window that appears. Afterwards, please skip to
procedure 7.
4. For Windows Vista:
a. Select “Locate and install driver software (recommended)” when the “Found
New Hardware” window is displayed.
b. Click on the Continue button when the “User Account Control” dialog pops up.
c. Insert the Setup/Application DVD-ROM, included with your scanner, into your
DVD-ROM drive when the system prompts you “Insert the disc that came with
your USB Scanner”, and click on the Next button. Afterwards, please skip to
procedure 8.
5. For Windows 7:
When the Setup/Application DVD is for several scanner models
3
The USB hub is not included with the scanner.