Plustek OpticBook A300, Руководство пользователя

Страница: 10 / 32

C
HAPTER
I. I
NSTALLING THE
S
CANNER
Before installing your scanner, please verify that you have all of the proper
components. A list of the package contents is provided in the “Box Contents” section of
this guide.
S
OFTWARE
I
NSTALLATION
R
EQUIREMENTS
Your scanner comes with the image-editing software (NewSoft Presto! ImageFolio),
OCR software (I.R.I.S. Readiris Pro 10 Corporate Edition), the document management
software (NewSoft Presto! PageManager), Adobe Reader, the scanner’s driver and the
Book Pavilion software. All of these software applications use approximately 800
megabytes of hard disk space after they are installed into your computer. To ensure
ample room for the installation, as well as for scanning and saving images, a minimum
of 1 GB of hard disk space is recommended.
The USB scanner can only operate under the Microsoft Windows 2000
Professional, XP or Vista operating system.
H
ARDWARE
R
EQUIREMENTS
This scanner connects to your computer through the Universal Serial Bus (USB)
which supports HOT PLUG AND PLAY. To determine whether your computer is USB-
capable, you must check the rear of your PC to locate a USB jack that looks like the
picture below. If you are having trouble in locating the USB port on your computer,
please refer to the hardware manual that came with your computer.
Upon examination, you should find one or two rectangular USB ports, which usually
appear as shown below.
USB Connector(s)
If you don’t find such USB ports on your computer, then you need to purchase a
certified USB interface card to add USB capabilities to your computer.
7