Plus P-106A, Руководство пользователя

Страница: 12 / 14

CAUSE AND TROUBLESSHOOTING TROUBLES No
1
)
The power supply cable is not inserted fully.
2
)
The fuse has blown. Replace it. If trouble continues after the
replacement, there is an interal problem in the machine.
3
)
Contact your nearest CDMservice center.
Power is not turned on
even if the power
switch is turned on.
1
)
Hopper guides are not positioned properly.
2
)
Notes are not in a good condition.
3
)
Notes are not placed properly in the hopper.
4
)
The gap is too narrow. Turn the paper thickness adjustment screw to
the direction of
ccllo occk kw wiis se e to w wiid de en n the gap a little.
5
)
The gap is too wide. Turn the paper thickness adjustment screw to
the direction of cco
ou un ntte errccllo occk kw wiis se e to n na arrrro ow w the gap a little.
6
)
The surface of the feeding drum or rollers is dirty.
(
Clean the
surface
)
Note feeding is not
carried out smoothly.
Notes are fed
intermittently.
Chain, double errors
occur frequently.
2 or 3 notes are
caught at a time.
8. TROUBLESHOOTING
If a problem occurs, please check the following “Troubleshooting Guide”. By taking the corrective
measures suggested, you will be able to resolve the problem. If the problem is persisted, please
contact your nearest CDM service center.
23 22
Note 1.
Note 2.
CAUTION
Sensors are used for the counting system in this machine. As these sensors
are of optical construction, the system may cause miscounting if dust or dirt
are stuck on the sensors.
Clean the sensors with enclosed brush.
Pieces of paper, dust and / or trash etc. accumulated in the hopper and / or
stacker may be taken into the machine: this may cause malfunctioning of the
machine.
Clean the hopper and stacker in the same way as above.
1
)
Before the hopper is opened, make sure to turn off the power switch.
2
)
Clean the machine after turning off the power.
3
)
Do not use chemicals for cleaning the machine.