Plus N-20S, Руководство пользователя

Страница: 32 / 50

E-32
IP Address=*
Subnet Mask=*
Default Gateway=*
Input the IP address (fixed).
Input the subnet mask.
Input the default gateway if necessary.
Contents upon purchase and when network settings are reset
Item Item name Setting Default
IP address IP Address Any value Blank
Subnet mask Subnet Mask Any value Blank
Default gateway Default Gateway Any value Blank
Save the “setting.ini” settings file, overwriting the
previous file.
Save to location: “setup” folder on copyboard (removable disk)
File name: setting.ini
• We recommend making a note of changed settings for future
reference.
Once overwriting is completed, the copyboard reboots
automatically.
Perform the USB disconnection procedure on the computer (see
step 3 on page E-19), then disconnect the USB cable.
Check the connection.
1 Connect the copyboard to the LAN port on a switching hub, etc.
2 Launch a web browser (ex.: Internet Explorer) on a computer
connected to network.
3 In the address field, input “http://” followed by the IP address that
was set, then press the [Enter] key.
If the copyboard’s top screen opens, the copyboard has been
correctly connected to network.
If the copyboard’s top screen does not open
This could be due to one of the following:
• Have you made a mistake inputting the IP address that was set?
• Is the copyboard’s LAN terminal properly connected to a LAN port
on the network?
• Is the IP address that was set being used by another device?
• If multiple units of this copyboard are connected, are they con
-
nected to the network with the same IP address?
• Is the IP address that was set within the automatic acquisition
range of the DHCP of the router, etc.?
• When using a proxy server, add the copyboard’s IP address to the
“Exceptions” in the proxy’s settings to set so that the proxy is not
used.
CB Setup and Network Setting Procedure