Wooden Walls
Wood screws
Make a suitable hole with an auger and
attach the Copyboard
with wood screws.
Concrete Walls
Anchors
Make a base hole in the wall with a drill.
Insert the anchor.
Fasten the main unit with screws.
Please use a drill of the hole diameter specifi ed for the anchor.
Steel Walls
Phillips head tapping screws (Pan head)
Check that the steel wall is reinforced and use a drill to make a hole of
suitable diameter, then attach the main unit with tapping screws.
(Ex.) Wood wall surface
M6 wood screw
M6 wood screw
Top wall bracket
Bottom wall bracket
Lower wall mounting bar
Upper wall mounting bar
4
.
Mounting a copyboard on the
bars
Wall surface
1
2
3
CAUTION
• Insert the unit in the top wall brackets
with at least 2 people. If the unit comes
out of place, it may fall and cause injury.
• After mounting the unit in the top wall
brackets, hold the top of the unit and pull
it forward to make sure that it is securely
in place. If the unit falls, it may cause
injury.
• When mounting the unit in the bottom
wall brackets, do not lift the unit up.
Doing so may cause the unit to come out
of the top wall brackets. If the unit falls, it
may cause injury.
Put the sockets located on the top of the
support pieces on the back of the unit on the top
wall bracket hooks, making sure that the sockets
are securely in place.
Then, gently lower the
unit and place
it on the bottom fi xing brackets.
Fasten the bottom edge of the main unit
support pieces using the M4 x 12 screws.
Reference: Installation Method for Various Wall Materials
Please perform an installation that suits the wall material.
Please install the main unit to posts or studs when the wall surface is of insuffi cient strength.
Installation Wall Material
Installation Method
3
2
1
Hook
Top wall bracket
Socket
Back of the unit
Support piece
Bottom wall bracket
M4 x 12 screw
(view from the bottom)
3
.
Fastening bars to columns
• Fasten the upper and lower wall mounting
bars to columns or the like using commercially
available M5 or equivalent screws.
Type of screws must be properly chosen
according to the wall materials or conditions.
See below for details.
24-4635-11A
