– 4 –
BF-030S, BF-035, BF-030PC, BF-041 1320mm (4 feet 3
31/32
in.)
Make holes for fitting the lower brackets.
Level line
Tighten using anchor screws suitable
for type of wall
(2 holes each right/left, totalling 4 holes)
BF-030W, BF-041W 1820mm (5 feet 11
21/32
in.)
– 5 –
• The spacing between the holes for fitting the board plates is 812 mm (32 in.) for BF-030,
BF-030PC, BF-035, BF-041S or 812 mm (32 in.)/1220 mm (48 in.) for BF-030W and
BF-041W).
• The screws for fitting the board plates to the copyboard must be firmly tightened.
(Tightening torque 8 kgf or more)
3. Fit the board plates to the copyboard.
4. Fit the upper brackets to the board plate at the top of the copyboard.
BF-030S, BF-035, BF-030PC, BF-041S 812mm (32 in.)
BF-03W, BF-030S 812mm (32 in.)/1220mm (48 in.)
Tap tight bind head
4 x 15 (4 pcs.)
Pan head screw + washer
M6 x 15 (2 pcs.)
