UNUM VEP4600 Appliance - Getting Started Guide - Copyright © 2020 by Pluribus Networks. All Rights Reserved.
Page 40 of 60
UNUM VEP 4600 Configuration (cont'd)
General Deployment Details and Management Scenarios
UNUM
1.
Deploy VM.
2.
Eth0 obtains a DHCP IP Address.
3.
Login to the VM and set up the Eth1 IP address.
4.
Add vnv(s) as a Seed Switch for UNUM. Performed post vNV config/ setup.
vNV
1.
Deploy VM.
2.
Obtain vmgmt0 IP address for vNV from DHCP.
3.
Disconnect the Network adapter 1 on the VM.
4.
Accept EULA.
5.
If fabric name is specified: join fabric and errors out under the following conditions:
a)
fabric doesn't exist or is not reachable or is running a different version
Provisioning Details and Steps for Inband Scenario