– 1 –
1. Unpack the Switch and Check Contents
10G Fiber Ethernet Switch
F9272-X
F9272B-X
2 front-post brackets
2 rear-post brackets with adjustable ears
20 bracket screws
2 rear bracket ear position-locking screws
Power Cords
Console Cable—RJ-45 to DB-9
Documentation—
End-User License Agreement, Quick
Start Guide
(this document) and
Safety and Regulatory
Information
Caution:
The switch includes two plug-in AC PSUs and five
fan tray modules that are installed into its chassis. All
installed modules must have a matching airflow direction.
That is, all modules must have a front-to-back (F2B) airflow
direction, or all modules must have a back-to-front (B2F)
airflow direction. The airflow direction of PSU and fan tray
modules is indicated by labels on the modules.
2. Attach the Brackets
Attach each of the two front-post brackets to the front of the
switch using four of the included bracket screws.
Attach each of the two rear-post brackets to the rear of the
switch using four of the included bracket screws.
For the rear-post brackets, use an additional two bracket
screws to secure the bracket at the mid-point on the side of
the switch.
1
2
3
1
2
3
3. Mount the Switch
Caution:
Installing the switch in a rack requires two people.
One person should position the switch in the rack, while the
other secures it using the rack screws.
As per your rack plan, mark the holes in the rack where you
want to install the switch.
Lift the switch into the rack and align it with the marked
holes.
Secure the front-post brackets to the rack using four screws
and cage nuts supplied with the rack.
4. Adjust Rear-Post Bracket Ears
Adjust the rear-post bracket ears to fit the depth of the rack.
Secure the rear post brackets to the rack rear posts using
four screws and cage nuts supplied with the rack.
Lock the position of the rear-post bracket ears using the
included position-locking screws.
1
2
3
1
2
3
3
2
1
1
2
3
E102016-AP-R01
150200001609A
54-Port 10G Fiber Ethernet Switch
F9272-X | F9272B-X
Quick Star t Guide
www.pluribusnetworks.com
