SFP-H / SFP-H-7 SERIES
with PIPM-R-7
User’s Manual
12 of 26
System Name
Defines a name for the system and gives it a unique identifier. This name is used when
displaying systems through the web interface.
User Authentication
Enable or disable user password authentication for the web interface.
Identify LED
Enables flashing of the Ethernet LEDs on the module.
UPnP Host
Enable or disable network discovery using Universal Plug and Play.
IGMP Version
Select the Internet Group Management Protocol Version. Plura supports IGMP v2 and v3.
NOTE: It is important to know which version of IGMP is in use on your network.
Selecting the wrong IGMP version may cause long delays in processing multicast subscriptions.
See your network engineer for more information.
System Modes
There is a set of pre-built system configuration modes, or "system modes," available from the
System Mode control on the Config page of the PIPM-R-7 web UI. These pre-built System Modes
are designed to save you time so that you can get your unit up and running quickly.
Each System Mode is built for a specific type of use case, taking into account factors such as
network conditions, protection requirements, timing, and latency considerations.
NOTE: The choice of System Mode will impact which controls are available. Multiple
variations of controls are possible on the Config page.
The following tables present the core characteristics for each pre-built System
Mode.
System Mode 1
PTP Low Latency
Description
PTP environment
Lowest protection*
Near-zero latency**
Video Clock Mode
PTP
Packet Protection Mode
Bypass
Frame Sync Mode
Bypass
Audio Sample Rate Converter Bypass
Transmitter Requirements
Narrow transmitter only
Latency Expected
0 frames (~4 video lines)
