Plura RUB1 PE, Руководство пользователя

Страница: 5 / 6

AC Adapter RUB1 PE
Page 3
2 Safety Precautions
The general safety information in this part is for both operating and service personnel. PLURA
products and accessories are only to be used as directed. Review the following safety instructtions to
avoid injury and prevent damage to the product or any products connected to it.

Read and keep these instructions.

Heed all warnings and follow all instructions.
RECOMMENDED INSTALLATION
1. Make sure that the power cord is not inserted when you plug the DC output connector
to the Rubidium DC input (“RLC” DSUB female con gender changer).
2. Fasten the DC output con gender changer to the Rubidium DC input (“RLC”) by
screwing it tight.
3. Insert the power cord into the three pole AC inlet of the AC/DC adapter.
4. Plug the power cord into the wall outlet.
WARNING
Use a power supply cord that matches the power supply voltage of the AC power outlet.
The power supply cord you use must have been approved by and comply with the safety
standards of your country.
Never modify the power cord or excessively bend, twist, or pull it. Do not place any heavy
objects on the power cord or expose it to heat. Damage to the cord may cause shock or
fire.
Use only the AC adapter specified for the PLURA product. Never use a voltage other than
that for which the AC adapter is rated.
Do not place any objects onto the AC adapter and do not use the AC adapter outdoors.
Keep the AC adapter away from heat sources.
Never touch the AC adapter while your hands are wet. To avoid injury or fire hazard, do not
operate in an explosive atmosphere.
Immediately unplug the power cord from the wall outlet or extension cord and refer
servicing to qualified servicing personnel, when the power cord or plug is damaged, split or
broken.
CAUTION
Do not expose the AC adapter to dripping or splashing water.
Make sure that the power cord is fully inserted into the wall outlet or extension cord.
Make sure that you unplug the AC adapter from an outlet before attempting to move it to
another location.
Always carefully disconnect the plug by pulling on the plug and not on the cord.
PREVENTIVE MAINTENANCE, QUALIFIED SERVICE PERONNEL ONLY