22
6. Control and Use of OSD Menu
continued
• Function 1,2:
Select the functions to be assigned to
individual buttons F1 and F2. Please refer to section 3-4
for detailed information.
• Back Light:
Adjust brightness of LCD Panel.
• FAN Motor:
Sets ON/Off internal Fan motor. Only available
in 17” model.
• Front Button LED:
Sets ON/OFF front LED
• Update Firmware:
Used to update system software
• Setup Load:
This is used to make a group change of the
function values which have been set.
• Factory:
To return to the factory default.
• User 1,2,3:
Menu setting is transferred to the Menu of
1,2,3 to be saved by user.
• Setup Save:
Save current menu setting into one of USER
1,2,3. USER 1,2,3 can be recalled by Setup Load.
• Firmware Version:
System software version.
• Operating Time:
Product operating time
6-8. SYSTEM Setup
Note:
While Back Light is adjusted, LCD panel requires enough time to be stable adjusting
Phase (brightness). It requires more than 30 minutes
To terminate Update Firmware status:
Press Menu button for 3 sec.
7. Program Update Port
7-1. Program Update Port (RJ-11)
Update Port(RJ-11) can be used in a situation as below.
1) To modify Firmware program
2) To control Color Temperature, Gamma Setting for LCD
3) To control Multi Monitors using PC Exclusive use program “Wall System Control” on PC
Please consult with technician for Program Update or for Serial Port use. Incorrect use of this
port may cause damage or malfunction.
Update (RJ-11)
1 2 3 4 5 6
Update Terminal Assignment
1 PIN
NC
4 PIN
GND
2 PIN
RX+
5 PIN
TX+
3 PIN
RX-
6 PIN
TX-
Содержание PBM-070
Страница 1: ...Multi Format HD Broadcast Monitor Operating Instructions PBM 070 7 PBM 070X 7...
Страница 30: ...Notes...
