User’s Manual: LCM-3G Series
Page
6
of
45
15. Earthling the product
This product must be earthed properly to comply with the safety regulations in the country of use. If you
are unsure of these regulations, please consult a qualified electrician.
16. Servicing
Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltages or other hazards. Refer all servicing to qualified service personnel. If the device does
not operate properly, switch it off and call your dealer.
17. Service
Turn this product off, unplug from the mains supply and refer servicing to qualified service personnel under
the following conditions:
A. If the power-supply cord or plug is damaged.
B. If the LCD has been damaged.
C. If water or moisture penetrated the glass and/or the LCD screen.
D. If the product does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
product to its normal operation.
E. If the product has been dropped or the frame has been damaged.
F. If the product exhibits a distinct change in performance.
18. Safety Check
Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition and the front seal is intact
.
19. Mounting
The product should be mounted on a wall only as recommended in the instructions.
20. Power
This device operates on an AC supply; the voltage is as indicated on the label on the Manual. This device
must be earthed at all times through the chassis as well as through the power lead.
