
7
Remove Memory Card, SIM Card and Battery
Note: If the phone is turned on, long press Power Key about 3
seconds until it tips phone options and select
Power off
and
then press
OK
to turn off the phone. After the phone vibrates,
remove the battery, SIM card and memory card.
Do not plug or remove memory card in boot state, otherwise it
will cause damage to the file system.
Charge the Battery
1.
Before charging, check the battery slot to ensure the battery has
been installed correctly.
2.
Plug one end of the charger into the phone.
3.
Connect another end of the charger to the socket.
4.
Start charging. It can be charged whether power on or power
off.
▪
In power on state, when the battery icon at the notification bar
with a lightning symbol means it is being charged. When the icon is
full means charge is completed.
▪
In power off state, when the battery icon on screen dose not
show 100% means it is being charged. When the icon is full and stop
rolling means charge is completed.
5.
Unplug the charger from the socket.
6.
Disconnect the charger and phone.
Use Touch Screen
¾
Press: Use the finger to press the desired option to confirm
selection or start an application.
¾
Long press: Long press the screen in current operation interface,
icon, or input area; you can open the option menu in current
interface.
¾
Slide: Slide the finger on screen horizontally or vertically. For
example, slide the screen in standby mode or main menu
horizontally to change menu page.