Plum Z351 Gator Plus II, Руководство пользователя

Страница: 7 / 22

5 6
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
— C o n s u l t t h e d e a l e r o r a n e x p e r i e n c e d r a d i o / T V
technician for help.
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone transmitting
at its highest certified power level in all tested frequency
bands, although the SAR is determined at the highest
certified power level, the actual SAR level of the phone
while operating can be well below the maximum value, in
general, the closer you are to a wireless base station
antenna, the lower the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC, Tests for each phone are performed in positions and
locations (e.g. at the ear and worn on the body)as required
by the FCC.
For body worn operation, this model phone has been
tested and meets the FCC RF exposure guidelines when
used with an accessory designated for this product or
when used with an accessory that Contains no metal and
that positions the handset a minimum of 1.0 cm from the
body.
Non-compliance with the above restrictions may result
in violation of RF exposure guidelines.
1.3 Charge Mobile Phone
When the phone is connected with the charger, charging
icon will show on the top right on the screen; if the phone
is turned off, charging icon will appear in the middle on the
screen. If the phone battery is low, the low power icon will
appear.
When the battery icon show full and no longer flashing,
that mean the charging is completed. Please disconnect
the AC power outlet which connects the phone and
charger after the charging is complete.