
3.3 WLAN
Wireless Local Area Network (WLAN) links two or more devices using some
wireless distribution method and providing a connection through an access point to
the wider internet.
NOTICE:
The WLAN signal coverage distance is about 100 meters and will
depend on the quantity, infrastructure, and other signals penetrate the object
and decide.
3.3.1 Open the WLAN and connect to a wireless network
1. Press the Home key, click on “
” -> Settings-> WLAN.
2. Select and open WLAN. The phone will automatically scan can be used a
wireless network.
3. Click on the WLAN settings. Then WLAN network will display a list of WLAN
to find the network of the name and security Settings (open network or with WEP,
WPA/WPA2 encryption). If the opening set of WLAN network notice, to find a cell
phone in the open wireless network can be used in the status bar shows the
icon(
).
4. Touch one of the WLAN network to connection. When you select open
network, mobile phone will be connected to the network. If selected is WEP,
WPA/WPA2 encryption network, it must first corresponding input password, and
then the touch connection
NOTICE:
When the phone is connected to a wireless network, the status bar will
display the WLAN icon (
), and displays the approximate signal strength (light up
the number of strip).If touch mobile phone at present the connected to a wireless
network, will display the name of the state, WLAN network, speed, signal strength,
safety information and IP address. If you want to remove phone wireless networks
set, please touch this window on the "don't save". If you want to connect to the
network, you must enter again these Settings.
Unless you choose not to save network, or the next mobile phone to connect
to previously had connected encryption wireless network, will not have to enter a
password accordingly. The network will search by WLAN, also is the mobile phone
does not need to perform additional steps can be connected to the WLAN network.
3.4 BT
1. Press the Home key, click on “
” -> Settings.
2. Click on “BT” to open BT. After open, the status bar will appear BT ( ).then
will begin to scan for BT devices within range. All the equipment will show up in BT
devices list below.
Important: Default password is XXXX Matching and connecting BT headset
11
Содержание Z306
Страница 1: ...User Manual Z306 Trigger Plus 3...
Страница 2: ......