Plum MED-TAB v.2, Инструкция по эксплуатации

Страница: 9 / 19

MED-TAB v.2 Instructions for Use PUB INT EN – 002TR
9
iQ-
VIE
W
2.6.
0
Gru
ndl
ege
nde
Anf
ord
eru
nge
n
CO
NF
DE
-
001
D9
8. i
9
7. i
Q
-
2.4 Care and cleaning instructions
CAUTION
Danger of incorrect image analysis results.
Frequent cleaning of the display using a display cleaner is recommended.
Finger prints and dirt may lead to incorrect image analysis results.
Use of rough tissues for cleaning may damage the surface which can impair the image quality.
Incorrect display cleaners may dull the surface and impair the image quality.
Do a new image acceptance test if you are unsure after any damage to the surface.
(H-No.: HW3.1.1, HW3.1.3, HW3.2.3, HW3.2.4)
Periodic cleaning is recommended to keep the display clean and to prolong its operational
lifetime.
Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners,
acid, steel wool or other strong solvents, as these may cause damage to the cabinet or LCD
panel.
The surface can be cleaned with a soft display-cloth, such as cotton or lens paper and special
display cleaner. If necessary, stubborn stains can be removed by moistening part of a cloth with
water to enhance its cleaning power.
CAUTION
Danger of incorrect image analysis results.
Do not scratch the display surface. Be careful with rings, keys or jewelry which could scratch
the display surface. Do not use touch pens other than the original one.
Scratches may damage the display and impair the image quality.
Do a new image acceptance test if you are unsure after damaging the surface.
(H-No.: HW4.2.1)
2.5 Usage of a memory card (optional)
The MED-TAB only accepts microSD
TM and micro SDHC memory cards with a maximum capacity of
128GB. Not all memory cards are compatible with MED-TAB. MED-TAB only supports the FAT file
system.
If you insert a card with a different file structure, the device will ask to reformat the memory
card before use. The file directory of inserted memory cards appears in the extSdCard folder of
the MED-TAB.
If you want to remove a memory card, please be sure that the device is not currently accessing
the memory card. Open “Settings” in the application list, choose the category “Storage” and
select “Unmount SD card”. After confirming this process, you can unmounts or remove the
memory card.