9. Using +garage for the
first time
9.1. Downloading the app
The access management app is available for free download
from App Store. You must download it and open the appli-
cation to proceed with your +garage activation.
9.2. Chgarage
+garage is powered by an internal lithium ion battery that
must be recharged regularly using a Micro Usb/Usb cable.
The battery is partially charged when you purchase your
+garage - before pairing the plugg you must complete a full
charge cycle.
To prolong the life of the internal LiPo battery:
• only recharge partially and frequently
• do not allow the battery to discharge completely
• carry out a complete charge cycle regularly
For more information go to:
plusplugg.com/en/support/faqs
9.3. Pgarage
In order to use your +garage you must connect it to your
iPhone using the 30-pin or lightning connector. The app will
detect the plugg automatically. The connection will take a
few seconds to complete, then the device is ready for you to
acquire the codes from your original remote units.
9.3. Acquiring codes
It is very easy to acquire the access codes from a remote
unit in use. Tap the +garage garage in the middle of the main
screen while holding down your remote unit‘s „open“ button.
The app quickly recognises the code and transfers it to your
iPhone.
+garage is compatible with fixed code remote con
-
trols. Before acquiring the code, check the specifica
-
tions of the of your door or gate opening device.
+garage is compatible with rolling code remotes
made by some selected producers. For more in-
formation, check the website at plusplugg.com/en/
support/downloads and plusplugg/en/support/faqs
9.4. Using +garage
When an access code has been acquired, you can immedia-
tely check the opening and closing of the associated door or
gate simply by tapping the active buttons on the app‘s main
screen. Access these controls using the +garage icon in the
basic menu at the bottom.
If you have enabled the localisation services for +garage,
when you arrive doors and gates will open automatically,
making use of your iPhone‘s GPS function.
EN
Chapter continues on the next page
à
