3
PLS Basic Air Curtains Water
GB
2 0
- 3
_ 1
C
Activate heat
0 = No heat
1 = Heat step 1 possible
2 = Heat step 2 possible
(3 = Heat step 3 possible)
Heat steps controlled by
thermostat
Choose fan step 1-5
Choose desired room
temperature 5 - +30 °C
Start up
System supplied with power. Three digits
1.4.0. (software version) is quickly shown
in th the status window followed by three
horizontal lines. After about 30 seconds the
prevailing room temperature is then shown in
the status window.
Use arrow up/down and set the desired room
temperature, fan speed step and heating step.
To change a setting push the round button
(confirm), the setting will start to flash and
can be adjusted by using the arrow up/down.
Factory settings gives manual control of
fan and heating controlled by thermostat.
For more setting alternatives see section
Operating modes.
At the first start up alarm and error codes
can occur, these can usually be reset without
action.
