Plotmaster Hunter 600, Руководство пользователя

Страница: 11 / 26

11
DETAILS ABOUT YOUR PLOTMASTER™
HUNTER SERIES 800
(H. Linkage Rod Connections for Seeder Assembly)
(Older Models)
The Linkage Rods connect the Seed Flow Control Handle to the Slide Adjustments lo-
cated on each box. The Control Handle and Linkage Rods in conjunction with the Slide
adjustment activates the seed flow control from the Seeder Assembly.
(I. “V” Shaped Rear Gang Assembly)
(8—4 per axle) 16” Disk on a 1” Axle with stamped sealed bearings for longer life and ex-
tended use of your equipment for many years. The rear disk are set up to pull tilled soil
inward, this is the soil that the front disc have tilled and thrown outward.
This tillage de-
sign creates an optimal seed bed for any type seeds to be planted including Grass Seed!
(J. Plow Carrier with (3) 4” Sweep Plow Tips)
The Sweep Plow gives tillage three advantages; (1) It works as a center buster between the 2
sets of disk gangs. (2) It helps pull the unit into the ground for increased tillage. (3) Aids in
breaking up roots and heavy vegetation prior to planting.
(
K. Plow Carrier Depth Adjustment)
The Sweep Plow has (4) depth adjustments. No matter the amount of vegetation your are
working with or the depth you wish to till your soil these adjustments will help you achieve
your goal.
(L. Storage)
This is where your Instruction Manual is kept for in-field reference. It can also be used to
store extra plow tips, hardware or small tools.
(
M. Adjustment for Front Gang Assembly)
The Front Gang Assembly can be adjusted to (4) positions depending on the amount of
tillage desired . Shown with gang set in first pin position this is the least aggressive, each
position that the top plate is moved back the tillage becomes more aggressive.
(N. Adjustable Front Gang Assembly)
(8—4 per axle) 18” Disk on a 1” Axle with stamped sealed bearings for longer life and ex-
tended use of your equipment for many years.
(O. On/Off Switch with Extensions)
The In-Line Switch is used to turn ON/OFF the seeder motor.
Re-
placement Fuse—30 AMP SLOW BLOW FUSE—On/Off Switch and Fuse Holders can be purchased separately……...
(H. Linkage Rod Connections for Seeder Assembly)
The Seed Flow Control Handle connects to the Slide Adjustments located on each box. The
Control Handle and Linkage Rods in conjunction with the Slide adjustment activates the
seed flow control from the Seeder Assembly.
(I. “V” Shaped Rear Gang Assembly)
(12—6 per axle) 16” Disk on a 1” Axle with stamped sealed bearings for longer life and
extended use of your equipment for many years. The rear disk are set up to pull tilled soil
inward, this is the soil that the front disc have tilled and thrown outward.
This tillage
design creates an optimal seed bed for any type seeds to be planted including Grass Seed!
(J. Plow Carrier with (5) 4” Sweep Plow Tips)
The Sweep Plow gives tillage three advantages; (1) It works as a center buster between the 2
sets of disk gangs. (2) It helps pull the unit into the ground for increased tillage. (3) Aids in
breaking up roots and heavy vegetation prior to planting.
(
K. Plow Carrier Depth Adjustment)
The Sweep Plow has (4) depth adjustments. No matter the amount of vegetation your are
working with or the depth you wish to till your soil these adjustments will help you achieve
your goal.
(L. Storage)
This is where your Instruction Manual is kept for in-field reference. It can also be used to
store extra plow tips, hardware or small tools.
(
M. Adjustment for Front Gang Assembly)
The Front Gang Assembly can be adjusted to (4) positions depending on the amount of
tillage desired . Shown with gang set in first pin position this is the least aggressive, each
position that the top plate is moved back the tillage becomes more aggressive.
(N. Adjustable Front Gang Assembly)
(12—6 per axle) 18” Disk on a 1” Axle with stamped sealed bearings for longer life and
extended use of your equipment for many years.
(O. On/Off Switch with Extensions)
The In-Line Switch is used to turn ON/OFF the seeder motor.
Replacement Fuse—30 AMP SLOW BLOW FUSE—On/Off Switch and Fuse Holders can be purchased separately……...