Plockmatic F142-001, Руководство по эксплуатации

Страница: 31 / 40

_________________________________________________________________________
31
3
FE-108
– Paper table overloaded
In order to stop paper table movement in case it is overloaded paper stack height sensor Q4
measures the amount of paper on the table when feed cycle starts. If the media used is longer
than 700 mm (27.6”) the permitted paper stack height is limited to 100 mm (3.9”). If this height
is exceeded the machine displays error code FE-108.
Actions:
•
Check that the paper loaded in the feeder matches the parameters (size and thickness)
set in the UI.
•
Remove some of the paper stack from the feeder table.
•
If the is paper stack is below the lower stack height marker on the paper wall, but the
error persists, clean the paper stack height sensor Q4. If the problem persists after
that, contact service.
FE-109
– Too much paper
In order to stop paper table movement in case it is overloaded paper stack height sensor Q4
measures the amount of paper on the table when feed cycle starts. If the media used is shorter
than 700 mm (27.6”) the permitted paper stack height is limited to 200 mm (7.9”). If this height
is exceeded the machine displays error code FE-109.
Actions:
•
Remove some of the paper stack from the feeder table.
•
If the is paper stack is below the higher stack height marker on the paper wall, but the
error persists, clean the paper stack height sensor Q4. If the problem persists after
that, contact service.
FE-112
– Double sheet detector (DSD) blocked
When starting the feed cycle each sensor is automatically checked for obstructions. Error code
FE-112 is shown if the ultrasonic double sheet detector (US DSD) Q10 is blocked during cycle
start.
Actions:
•
Remove any jammed sheets from the paper path. If the sheet is damaged, discard it.
•
Check the paper path for any obstructions or debris.
•
If there is nothing covering the sensor, but the problem persists, clean sensor Q10
using the sensor cleaning brush. If the problem persists after that, contact service.