PLINIUS M7 Instruction Manual Page 3
OUTPUTS:
The
PLINIUS
M7 is fitted with a very comprehensive array of output facilities.
There is provision for connection of 2 stereo amplifiers. This can be useful for
bi-amping.
SPECIFICATION:
Outputs:
Main Out:
900mV for specified input level.
Tape Out:
175mV for specified input level.
Inputs:
CD and Other High Level Inputs:
200mV for rated output 47k Ohm.
Phono:
1mV for rated output 47k Ohm, 220pF.
Overload:
CD and other High Level Inputs:
5.5V RMS @ 1kHz.
Phono:
50mV RMS @ 1kHz.
Noise:
CD and other High Level Inputs:
>80dB below rated output.
Phono:
>70dB below rated output.
Distortion:
All THD and IM is below audibility.
It is our policy to improve our products on a continuing basis. These brief
specifications are given with that in mind. Where possible any improvements made to
this amplifier will be advised to the owner and will be offered as retrofittable.
SERVICING:
You will not void any warranties by removing the Preamplifier covers. However if the
top cover is to be removed please turn the Preamplifier off first. The voltages present
on the circuit board could be harmful.
In the unlikely event that your Preamplifier should require service please take it to your
dealer in its original packaging. They will then determine if the unit should be returned
to the factory. Your PLINIUS dealer has a good understanding of our products and
he will be able to advise on any further installation requirements.
A damp cloth is all that is required to clean dust and fingerprints from the surface of
your M7.
