Plinius PLINIUS 8200P MKII, Инструкция по эксплуатации, Страница: 11 / 16

11
To achieve a sound performance that is correctly aligned to your room, make sure all of the leads carrying
signals for the RIGHT channel loudspeaker are connected to the RIGHT input to the amplifier from your
preamplifier or CD player etc. Signals for the LEFT channel should be wired in a similar fashion.
CONNECTING THE MAINS SUPPLY
Now that your Plinius 8200P Power Amplifier is configured to your system correctly, the mains cable can
be plugged into the IEC socket on the back of the amplifier. Ensure that the processor switch on the back
panel is correct for your intended usage (normally ‘bypass’), and check the speaker cables are connected
correctly. Flick the power switch on the front panel to the right. The power LED will pulse for five
seconds as the internal microprocessor allows the internal circuitry to stabilise. Press the mute switch on
the back panel to close the mute circuit of the amplifier. You can now enjoy your new Plinius 8200P
Power Amplifier.
WARM-UP PERIOD
You will find that the Plinius 8200P will become noticeably ‘warmer’ in sound after being on for a period
of time. We usually recommend waiting at least 24 hours before expecting the best quality of sound
reproduction from your amplifier. Also, as the Plinius 8200P uses very little power while on, we suggest
leaving the unit turned on so that it will always be at it’s sonic best.