14
PLINIUS HIATO
Installation & Operation
WARNING: RISK OF ELECTRIC SHOCK
This amplifier operates at hazardous voltage levels. We recommend that any work
requiring removal of the lid be referred to a suitably qualified and experienced service
technician. DO NOT place this amplifier in any position where liquids or any foreign
material may accidentally enter it.
PLEASE READ & UNDERSTAND THE PRECAUTIONS WITHIN THIS MANUAL
FOR PLACEMENT & OPERATION OF THIS PRODUCT.
MAINS VOLTAGE CONNECTION
Firstly, check that the mains supply voltage printed on the rear of this amplifier is
similar to the mains supply voltage in your area. If in doubt, please consult your
Plinius dealer.
Mains supply power connection is via the supplied plug-in lead. A standard IEC
socket connects the mains power at the amplifier end, while a local mains plug is
required at the wall end.
The wiring code used inside all Plinius product is:
Green to Earth/Ground
Blue
to Neutral
Brown to Phase/Live
Should a ‘local’ plug need fitting to the wall end of the lead, ensure that a suitably
qualified service technician wires the plug correctly.
IMPORTANT: DO NOT POWER UP YOUR AMPLIFIER UNTIL YOU HAVE
CONNECTED YOUR INPUT/OUTPUTS CORRECTLY FOR YOUR SYSTEM.
CONNECTIONS
Connections to your Plinius Hiato should be made in the same order as they are
listed in this section. DO NOT attempt to connect your Plinius Hiato until you have
read and fully understood these instructions.
Although these instructions refer to the connection of the Hiato to line level source
components, the Hiato can also be safely installed into multimedia systems by
following the same installation guidelines. Should you require further assistance,
please contact your Plinius dealer.
