Pliant Crewcom CCU-22, Руководство по эксплуатации

Страница: 86 / 98

Restore Factory Defaults
Users can choose to restore factory defaults for the device or system. When restoring factory defaults, these settings
are reset to their original factory settings:
Control Unit Factory Settings
Control Unit Setting Control Unit Default Reset by “Restore Defaults”
CU Name (Long) ESN#
CU Name (Short) ESN#
Contrast 3 X
Backlight Brightness High X
Talk LED Brightness High X
Sync Priority Master
Intercom Type OFF X
Intercom Call OFF X
Intercom Mic Kill OFF X
Intercom Echo Can ON (2-Wire); OFF (4-Wire) X
Intercom IN (2w/4w) 2W: −6
4W: 0
X
Intercom OUT (2w/4w) 2W: +4
4W: 0
X
Auxiliary IN 0 X
Auxiliary OUT 0 X
SA Relay Enable X
SA Audio 0 X
Local Conference None
Local Mic Type Auto Detect X
Local Mic Gain (Dynamic) 6 (+23 dB) X
Local Mic Gain (Electret) 3 (−4 dB) X
Local Sidetone Med (−12 dB) X
TCP/IP Mode DHCP Client
Access Rights Admin
Note : Restoring CU factory defaults does not erase RP pairing information. Clearing an RP's memory
does erase RP pairing information. For information about clearing RP memory, see the RP Manual .
Operation - 78