Plextor PX-AV200U
Chapter 3. Trouble Shooting
Q:
Why doesn’t my system detect
the
PX-AV200U?
A:
(a) Make sure you enable the USB port in the motherboard BIOS setup.
(b) Please make sure that your system has the latest USB2.0 host driver
and that the host is detected in the Device Manager.
For Win XP, please upgrade to Service Pack 1 or above.
Q:
Why can’t I see video display?
A2 :
(a) Please check your hardware connections
(see page 3; 2.1 Hardware
device description)
and choose the correct video input source.
(b) Please make sure your system is using the
latest USB2.0 host driver.
For Win XP, please upgrade to Service Pack 1 or above.
Q:
Why is the resolution always 320x240 in preview mode?
A:
Possibly because the PX-AV200U is plugged into a USB1.1 port , or, though
your USB port is 2.0, the driver needs to be updated. Upgrade the USB2.0
host driver from Microsoft Website.
Q:
Why does the system error show
“High Speed device plugged into Full
speed USB port…”
A:
(a) Please make sure your system supports USB2.0..
(b) Please make sure that the USB driver is installed and functional by
checking the status in Device Manager.
Q:
Why do I get unstable video during preview and recording ?
A:
Verify the latest HDD controller driver is installed
We suggest that you use the XP or Vista system bundled driver.
4
