background image

Removing the Caddy from the Drive

1) Push the Eject button. The caddy will eject from the drive in 2--3 seconds.

2) Pull the caddy straight out of the drive.

3) If the caddy will not eject from the drive after pushing the Eject button, you

should be able to remove the caddy from the drive by using the Emergency
Eject button. Turn off power to the drive. Insert a paper clip into the
Emergency Eject hole. The caddy should now eject from the drive. Please
contact Plextor’s Technical Support Department before attempting to rein-
sert the caddy into the drive.

Cleaning the Disc

If the disc is merely dusty, you may use a commercially available dust removal spray
such as Dust-Off or Vari-Air to blow dust particles off the disc.

After removing the dust particles, you may wipe the disc using a clean, soft cotton
cloth. Use a straight-line motion, wiping 

from the center out.

 Do 

not 

wipe the disc

in a circular motion.

If a disc becomes dirty or soiled with grease or other contaminants not removable by
wiping, you may clean the disc with a CD-ROM disc cleaner available at most
computer dealers. Follow the directions packaged with the cleaner.

Hint: 

Keeping your CD-ROM disc in a caddy at all times will prevent the
disc from becoming dirty or damaged.

CHAPTER 10 ---- Using CD-ROM Discs and Caddies

48

  PX-43CE/PX-45CE OPERATION MANUAL

Содержание 4PS-3






















Отзывы: