2
Set up the PLEXTALK Pocket
1. Turn the PLEXTALK Pocket over. Make sure two small projections are up. Push square button which is bottom of
the PLEXTALK Pocket and put finger of another hand on two lines which are middle of the PLEXTALK Pocket, then
press by both hands and slide cover toward bottom side. Remove the cover completely. (Figure 1)
2. Hold the battery by left hand and make sure two projections are right side of battery and a small projection is
bottom of left side. (Figure 2)
3. Put battery in the PLEXTALK Pocket from right side. If you are aiming to insert battery from left side, battery hits a
part of PLEXTALK Pocket and battery cannot be inserted. (Figure 3)
4. Close battery cover. Place cover about 5mm lower than closed position. Slide cover up. Make sure cover is
automatically locked. (Figure 4)
5. Turn the PLEXTALK Pocket over, front side becomes up. Plug power adapter into connection which is located left
of bottom side. (Figure 5)
6. Turn on the PLEXTALK Pocket by pressing and holding the Power key.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
