Page
4
of
23
Document number 291945 V5
PS25201B Compact Sensor Showing Front and Back
These compact sensors are intended for surface mount in a finished system. This style of
sensor is not directly suitable for connection to the Control/Interface Box and so these
sensors are supplied on small demonstration boards that are terminated by a robust socket.
Single channel and dual channel boards are available. The image below shows examples
of these two board types:
Single Channel Demonstration Board Carrying a Compact Sensor
Dual Channel Demonstration Board Carrying Two Compact Sensors
The demonstration boards are connected to the Control/Interface Box by two PS25013
cables (supplied). These are terminated by a four pin DIN plug that attaches directly to the
inputs of the PS25003 Control/Interface box.
The details of the sensors and demonstration boards is summarised in the table below:
