Pleora Technologies iPort NTx-Pro, Руководство по оборудованию

Страница: 11 / 52

7
Copyright © 2010 Pleora Technologies Inc.
Connector Summary: OEM: NTx-Pro
The connector summary for the NTx-Pro IP Engine is listed below.
Connectors
Connector Name Component ID Link
Ethernet Connector J1 See “Connector: Ethernet” on page 13.
JTAG Connector J2 See “Connector: JTAG: 2x5-pin Header” on
page 11.
Power Connector J3 See “Connector: Power” on page 15.
User Circuitry Connector J4, J5 See “Connector: User Circuitry: 2x 50-pin FFC/
FPC” on page 17.
Connector Summary
Component ID Description Mfr. ID Source Mfr.
J1 CONN RJ45WLED SHLD GR/
GR HORZ HFJ11-1G11E-L11RL Halo
J3 CONN HDR 2POS VERT .100
TIN 644874-2 Tyco Electronics
J4/J5 CONN FPC/FFC 50POS .5 mm
VERT SMD FH12-50S-0.5SV(55) Hirose
J2 CONN PRT 5PN DOUBLE-ROW CLP-105-02-G-D Samtec
NOTE!
Mate to Connector Summary
Mate Connector Description Mfr. ID Source Mfr.
Mate to J2 CONN HEADER 10POS DUAL
.05” SMD FTSH-105-01-l-DV Samtec
Mate to J3 CONN HOUS 2POS .100 W/
RAMP/RIB 22-01-3027 Molex
Mate/Cable to J4/J5
(FFC Camera I/F) FFC, 50-PIN, 0.5 PITCH,
LENGTH AS REQUIRED 050R50-XXXXB A,
where XXXX is the
length of 0001 to 9999
in mm
Parlex
a
a. Compatible with Hirose connector FH12-50S-0.5SV to MIL-STD-810F, Method 514.6: 5-2000 Hz. 7.7 gs.
Source manufacturer, description and identification can vary for each component.
NOTE! The J1 is not specified, but the corresponding cable must be Cat 5e and above.
NOTE! The NTx-Pro IP Engine does not require a crossover cable to adjust the pinout signals to
communicate through a switch, or to a host PC. It adjusts the data rate automatically to
transmit at 10 Mbps, 100 Mbps, or 1 Gbps.