Computer Operation
Functions and operations
Speci
fi
cations
Inserting the battery:
1. Carefully pull the Training Computer (8) out of the Main Frame (1).
The Training Computer (8) is attached to the Main Frame (1) by a cable
and may be pulled out of it with a maximum of 10cm.
2.Insert the 1 x AAA battery (included) into the battery compartment
at the back of the Training Computer (8). Observe polarity (+/-).
3. Insert the Training Computer (8) back into the Main Frame (1).
The select button (1A) on the Training Computer (8) should be on the
side nearest the Tension Knob (10).
Adjusting the training computer:
The training computer displays various training data.
Press the select button (1A) to switch on the computer.
Press the select button (1A) repeatedly until the desired function is
selected.
You can switch between the following functions:
STOP
The training computer automatically stops the measurement if the
pedals have not been pressed for more than four seconds.
SCAN
If you select this function the display will switch between the functions
T,D,C,T-C and CA automatically every six seconds.
T=Time
This function shows you how long you have been doing an exercise.
D=Distance
This function shows you the distance you have traveled during an exercise.
C=Pedal revolution count
This function shows you how many pedal revolutions you have completed during an exercise.
T-C=Total pedal revolution count
The monitor will accumulate total numbers of different training period. This data can be reset to zero by
replacing battery.
CA=Calories
This function shows you approximately how many calories you have burnt during an exercise.
The training computer switches off automatically after about 4 minutes if:
- The pedal arms have not been turned within the four minutes end.
- You have not pressed the select button during that time.
The training computer then resets all training data except for T-C to zero.
8
1
10
AAAx1
Speci
fi
cations
Function
T (TIME)
D (DISTANCE)
0:00-99:59 (Minute:Second)
C (COUNT)
0-9999 COUNTS
0.0-9999KM
T-C (TOTAL-COUNT ) 0-9999 COUNTS
CA (CALORIES) 0-9999Kcal
Sensor
No-contact magnetic type
Battery type
1 x SIZE-AAA (included)
Operation temperature
0
˚C ~ +40˚C (32˚K ~ 104˚K)
TM
5
