CAP-2000
DT Istr (CAP-2000) 05/14_ Rev 2_05/17
14/16
OPERATIONAL INSTRUCTIONS
1. Always ensure the switch is at OFF position before connecting the power supply.
2. Insert the plug into a suitable socket.
3. Turn the Power switch on at the bottom, and the heater is ready to be controlled by the remote control.
Attention:
When the heater is turned on for the first time, it may release a slight, harmless odour or smoke.
This odour or smoke is a normal occurrence caused by the initial heating of the internal heating elements and
should not occur again
Using the Remote
Note: The heating and flame function can only be
operated by the remote control.
The remote control requires 2x AAA size batteries
(not included) .
Open the battery compartment by sliding the cover
down and insert the
batteries noting the polarity indicated in the battery
compartment.
The remote control will work within a 6 metre radius
of the fireplace.
To activate the fireplace press the power ( ) button. The flame & ember effect will automatically turn.
•
To turn off/on the flame & ember effect press the “DISPLAY ON/OFF” button.
•
The Ember +/- buttons control the brightness of the pebble bed in total there are 6 setting.
•
The FLAME INTENSITY
+/-
buttons control the brightness of the flame effect.
•
HEATER ON/OFF button will activate the heating function.
- High (1900W)
- Low (950W)
- Temp: this function will automatically control the room temperature between 22-25°C. It will
automatically shut off when the room temperature reaches 25°C and will activated again once the room
reaches 22°C.
MAINTENANCE
1.
This appliance requires only cleaning of the external surface.
2.
After use and before cleaning, disconnect the plug from the electrical outlet and allow the stove to cool.
3.
Dust regularly and leave it free from thread, fluff or other foreign objects that can restrict normal air
circulation.
4.
To clean the exterior surfaces, use only a soft cloth. Do not use solvents. Do not spray liquids directly onto
any surface of the unit.
5.
Do not clean the glass on the inside of the unit as this may cause damage to the surface.
6.
Do not throw the box, use it to store the equipment.
7.
When you don’t use the appliance, store it in its original packaging and store in a dry place.
FIG. 5
FIG. 6
