21
If your motor home is equipped with TV and DVD components, you will find these located in the rear entertainment
centre cabinet. These two components are powered by a 12-Volt power source.
NOTE:
Your DVD is a player only;
it will not record. To play a CD or MP3 the TV must be in the on position.
TD Full Size Bed Assembly
To make up the Full-size bed in the TD model, remove the night table from between the two twin beds and store it
underneath the rear seat compartment accessed from the exterior rear door. Then, remove the support boards and store
them underneath both twin beds. Place these boards along the oak support rails, which are along the sides of the twin
beds. Finally, place the four backrest cushions in between the twin beds on the support boards.
.
TS Bed Layout
The TS unit is unique in that it has 3 possible bed lay-out position: king-size, double, or two single beds.
For a king-size bed: (1) bring the power sofa forward into a full lay-out position; (2) move the driver’s ottoman seat in
so that the oak blocks on the bottom of the cushion are in front of the face frame; (3) place the cushion support board
(found in the front closet) between the oak cushion blocks on the driver’s side supported by the oak rails on the
passenger’s and driver’s side; and (4) place the black rest cushions on the support board to fill in the space between the
two ottoman cushions.
NOTE:
In the Excel TS, move the passenger’s ottoman seat out so that the back cushion block
is in front of the face frame and the front cushion block is behind the face frame.
For a double bed: bring the power sofa into a full layout position - sleep across the unit using only the power sofa bed.
For two single beds: (1) bring the power sofa into a full layout position and (2) remove the ottoman backrest cushions.
