pleasant hearth OFG466TA, Инструкция по эксплуатации

Страница: 11 / 78

11
5
Phillips screwdriver
Phillips screwdriver
Phillips screwdriver
X 4
X 4
X 4
ASSEMBLY INSTRUCTIONS
4. Attach the back panel (E) to the left and right side
panels (G, D) with four M6X12 bolts (AA).
Tighten with screwdriver (GG).
Hardware Used
5. Find the spindle at the bottom of the door (M).
Insert it into the hole on the bottom plate (H). Insert the
top spindle of the door (M) into the hole on the door
bracket (L) as pictured. Hold the door (M) in place as
you attach the door bracket (L) to the left and right
side panels (G,D) with four M6 x 12 bolts (AA). Make
sure to adjust the gap between the door (M) and door
bracket (L) to make it even when tightening the bolts.
Do not put door bracket (L) too close to the door (M)
to ensure that it can open easily. Tighten with Phillips
screwdriver (GG).
Hardware Used
G
M
L
D
D
H
E
G
4
AA
AA
AA
AA
AA
GG
GG
GG
Bolt M6 x 12
Bolt M6 x 12
Bolt M6 x 12
6. Line up the holes on the table (C) with the screw
holes on the left and right side panels (G, D).
Insert four M6X12 bolts (AA) through the
holes. Tighten with Phillips screwdriver (GG) and
wrench (FF).
Hardware Used
6
G
G
D
C
C
FF
Wrench
AA