pleasant hearth AMHERST FA811S, Руководство пользователя

Страница: 4 / 18

4
ASSEMBLY INSTRUCTIONS
Hardware Used
1. Attach the two feet (B) to the front of the screen
(A) by inserting four M6x20mm bolts (AA)
through the pre-drilled holes in the feet (B) and
through the screen frame (A). Secure with four
M6 nuts (BB). Use a wrench (DD) to hold the
bolt (AA) in place while using the other wrench
(DD) to tighten the nut (BB). Repeat for all 4
bolts (AA)/nuts (BB).
M6x20mm Bolts
x 4
AA
1
M6 Nut
x 4
BB
Hardware Used
2. Attach the back feet (C) to the back side of the
screen (A) by inserting one M6X25mm bolt (CC)
into the hole in each foot (C) as illustrated
in figure 2. Adjust feet (C) to desired width.
Tighten against the screen (A) using
the wrench (DD).
NOTE: The back feet are designed to adjust to
the inside width of your fireplace opening so
that, if desired, the screen can be placed flush
against the fireplace.
2
x 2
CC
A
CC
C
Wrench
Wrench
DD
DD
M6x25mm Bolts
A
B
AA
BB
x 1