Playworld Systems XX0365 Скачать руководство пользователя страница 15

Guidelines & Information (fs SPE_noslide)

 Annex Page 1 of 7

Guidelines

Important ! Please Read Completely Before Beginning Installation. 

According 

to a report published by the U. S. Consumer Product Safety Commission (C.P.S.C.) 
72% of all playground injuries result from accidental falls. With this in mind, this 
equipment is designed to fi ll the need for safe yet challenging play. In conjunction 
with design efforts to reduce the possibilities of injuries, this equipment 

must

 

be installed "Step by Step" per our installation instructions. As a new owner you 
are responsible for the correct installation, safe use, and maintenance of your 
equipment.

Installation Guidelines
• 

Identify all parts and thoroughly read the assembly instructions before 

beginning construction.

• 

Refer to your playground equipment plan and footing diagram to assure 

the equipment purchased

 

will fi t into your selected site area. The use and no-

encroachment zones around the play equipment shall be obstacle-free areas 
designated for unrestricted circulation.

• ASTM 

compliance: 

The overall use zone measurements for stationary play 

equipment should extend a minimum of 72 inches (1829 mm) from its perimeter; 
dimensions and confi guration of the use zone are dependent upon the types of 
included play equipment. The use zone of stationary play equipment may be 
overlapped by the use zone of adjacent stationary play equipment if the adjacent 
designated play surfaces are no greater than 30 inches (762 mm) above the 
protective surfacing level. They should be a minimum of 72 inches (1829 mm) 
apart. If the adjacent designated play surfaces are greater than 30 inches (762 
mm) above the protective surfacing level, the pieces of equipment should be a 
minimum of 108 inches (2743 mm) apart. 

• CSA 

compliance: 

The overall use zone measurements for stationary play 

equipment should extend a minimum of 1800 mm from its perimeter; dimensions 
and confi guration of the use zone are dependent upon the types of included play 
equipment. The use zone of stationary play equipment may be overlapped by the 
use zone of adjacent stationary play equipment if the adjacent designated play 
surfaces are no greater than 700 mm above the protective surfacing level. They 
should be a minimum of 1800 mm apart. 

• EN 

compliance: 

The overall use zone measurements for stationary play 

equipment are dependent upon the fall height of the equipment. For a fall height 
exceeding 1500 mm a formula is applied to determine the use zone (impact zone) 
of the equipment. There is a minimum of 1500 mm from its perimeter; dimensions 
and confi guration of the use zone are dependent upon the types of included play 
equipment. Refer to the Use Zone diagram or master structure drawing.

• 

Site layout is a critical part of the overall installation. Footings must be 

measured and marked accurately according to the footing diagram. A level and 
clear installation site is ideal.

• 

Good drainage around the structure and its supports is important. Inquire with 

local contractors for appropriate recommendations.

• 

After laying out all footings and before digging holes, be sure to inquire about 

underground utilities that may exist.

• 

Do not leave the job site unattended without making sure that all fastening 

hardware on all components are tightened according to tightening torque 
specifi cations listed on every installation guide. We also recommend roping off 
construction area and covering all holes that do not contain a piece of equipment 
with plywood or other suitable material.

• 

Excavate holes as shown in the footing detail. If a level and clear site cannot 

be obtained, adjust the depth of footing to maintain a level footing base. If soil 
conditions are loose or unstable, a larger diameter footing may be required. Inquire 
with local contractors for appropriate recommendations. Be sure concrete that 
might have splashed onto the unit is washed off before it dries. Allow concrete to 
harden 72 hours before allowing your structure to be used. 

Assemble the entire 

structure before pouring concrete unless specifi cally instructed to do so in 
the installation instructions.

• 

Insure that Age Appropriate and Hard Surface Warning/Playworld Systems 

identifi cation labels are properly affi xed to the play equipment. Labels are to be 
plainly visible according to current playground equipment guidelines.

Содержание XX0365






















Отзывы: