PLAYTIVE MINI RC-RACER, Инструкция по эксплуатации, Страница: 9 / 22

9
• Arrow pointing forward
(1c) + arrow pointing to the
left (1k): Vehicle turns to the
left (fig. O).
• Arrow pointing backwards
(1g) + arrow pointing to
the right (1f): Vehicle moves
backwards turning to the right
(fig. P).
• Arrow pointing backwards
(1g) + arrow pointing to
the left (1k): Vehicle moves
backwards turning to the left
(fig. Q).
Note: To enhance your enjoy-
ment while driving set up the
traffic cones (4) at regular
distances apart and steer the
Mini RC Racer around the
traffic cones.
Trimming the front axle
(fig. J)
If the Mini RC Racer no longer
travels in a straight line, even
though you are pressing the
forward arrow on the remote
control, proceed as follows:
1. If the Mini RC Racer drifts to
the right, slide the trimming
lever (2a) a bit to the left.
2. If the Mini RC Racer drifts
to the left, slide the trimming
lever (2a) a bit to the right.
3. Repeat step 1 or step 2 if the
Mini RC Racer continues not
driving in a straight line.
Storage, cleaning
CAUTION: Before you
clean the product the on/
off switch of the Mini RC
Racer must be in the OFF
position.
The Mini RC Racer must be kept
dry and after each use any
soiling, for example woollen
threads, hair, dust, etc. must be
removed. To do this use a dry
cloth for cleaning and avoid
contact with water on elec-
tronics, rechargeable battery,
and motor. Fasten the Mini RC
Racer to the remote control
and store it away in the box.
Store the product in a dry and
dust-free location out of direct
sunlight. The optimal storage
temperature is between 10°C
and 25°C. Switch the Mini RC
Racer off when it is not being
used. Remove the batteries from
the remote control.
GB/IE/NI