5
(1)
FC 3175
FC 3175
(1)
SA 4700
(1)
FC 3201
Mark board with measurement
shown for location on this step.
Icon Glossary
Secure screw (flush to top) with
bit size shown.
Place tower or component in
desired location.
Secure hardware with
socket/wrench size shown.
Mark board with template using
pattern shown on this step.
Note: DO NOT drill through
template.
Drill through board at correct
location with countersink tool and
bit size shown.
Pre-drill into second board with
correct depth and bit size shown.
Note: Use pre-drilled &
countersunk board as a guide
for hole location.
Drill down the depth shown into
board at correct locations using
bit size shown.
Note: You may use any bracket
as a drill template.
Icons are used throughout instructions to indicate process for each step.
