7
CAUTION: These boards should be pre-drilled
and countersunk to avoid cracking.
Note: Adjust
countersink tool to width of first board to
countersink to proper depth. Pre-drill into
second board using first board as a template
before attaching.
CAUTION: Spacing between boards must be
less than 1/4" or a finger entrapment could exist.
CAUTION: Spacing between boards must be
less than 3
Z
/
x
" (or greater than 9") or a head/
neck entrapment could exist.
CAUTION: Ground must be level. Installation on
a hill or incline will create unsafe conditions.
CAUTION: Minimum spacing is required from the
closest point of all other rides or stationary objects.
CAUTION: Use two people to rotate, lift or support
structure at this step to avoid injury to yourself or
bending of brackets.
CAUTION: Failure to anchor properly could cause
serious injury. Anchors must be placed below the
level of the shock-absorbing surfacing material to
prevent tripping or injury resulting from a fall. Refer
to the Safety Guidelines at the beginning of this
plan.
Note: If soil conditions permit anchors to be
pulled out easily, such as in sandy soil conditions,
cementing is required. If your ground is too hard
to screw in the anchors you can remove the earth
with a shovel. Install the anchors and compact the
earth as you replace it.
CAUTION: Use wrench to tighten Quick-Link
Connectors. Failure to tighten Quick-Links securely
could result in injury.
Safety Warning Glossary
Содержание MESA Bronze
