PlaySafe 22-PS311, Руководство пользователя и инструкции по сборке

Страница: 6 / 13

6
©
2007 Pacific Cycle, Inc.
Slide
Name Each
Rail/Ladder Leg 2
Front Leg 2
Slide 1
Ladder Step 2
Leg Support Bar 1
PRE-ASSEMBLED HARDWARE
For easier assembly, Playsafe™ has pre-assembled some of the parts for you. Most of the screws and bolts should already be
in place. If removal of this hardware is required for certain assembly steps, it should be replaced in its original position.
Hardware shown in the assembly steps are actual size.
MAIN FRAME ASSEMBLY
Required Parts:
Top Bar Section x3 Leg Section x8
Support Bar x4 Leg Fitting x4
Pre-Assembled Parts:
•
Corner leg fittings should be attached to two of the top bar sections.
•
Swing, trapeze, and rope disc hooks should be in place on the top bar sections.
•
Hardware for connecting the legs to the leg fittings should be in place in the leg fittings.
•
Hardware for the support bars should be in place on the leg sections.
Step Illustration Instructions Hardware Reference
1 Join the three sections of the top bar
together by connecting through the center
leg fittings. Remove the hardware, connect
the top bar sections through the leg fitting,
align the holes, and reinsert the hardware.
NOTE: The top bar section which has only
one hook attached should be placed in the
middle.
Part Ref. #: PSHW10