8
Receive Timelock
1. Receive a USB device. Playnetic has set the
correct start- and endtime for you.
Install a Timelock
1. Remove the bolts with the supplied hex key.
2. Remove the service hatch with the label.
3. Important! The timelock must be installed at 12
o’clock local time. If the installation is being done too
late or too early, the timelock will not work properly.
4. Put the USB stick into the computer.
5. Generate energy. Wait until the update is completed.
Remove the USB stick after completion.
6. Make sure that you put the dust cover back over the
USB port.
7. Close the service hatch.
Update Your Timelock 2x a Year
For updating your timelock, use the USB device which
you received from Playnetic with the correct start- and
endtime (same USB device for install option). Repeat
step 1 to 7 from ‘install a timelock’ to complete the
update.
“In progress, please wait...”
“Downloading data
completed, remove USB
device”
