For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
TWISTER SLIDE
Rev F
9/17/2009
1710
Page 4 of 5
Step 6
Place Slide Support in footing hole and attach to
Support Bracket as shown in Figure 1.6. (See Note A)
Step 5
Attach sections together as shown in Figure 1.4. Refer
to structure Top View for configuration and support
locations. For section joints where Support Bracket is
attached, see Figure 1.5. (See Note A)
Determine footing center location by dropping plumb
bob from Support Bracket(s).
Step 7
Place Slide Leg in footing hole and attach to Exit
Section as shown in Figure 1.7. (See Note A)
SLIDE
Hex Bolt
3/8 x 3/4"
O.D. Washer
3/8" x 1"
LEG
SINGLE
EXIT
SECTION
Figure 1.7
SLIDE
SUPPORT
Figure 1.6
Bolt
Button Head
O.D. Washer
3/8" x 1"
O.D. Washer
3/8" x 1"
Cap Nut
3/8" Black
3/8" x 1"
SUPPORT
BRACKET
3/8" x 1-3/4"
Button Head Bolt
3/8" x 1"
O.D. Washer
Figure 1.4
SUPPORT
BRACKET
3/8" x 1-3/4"
Button Head Bolt
3/8" x 1"
O.D. Washer
Figure 1.5
