Playcraft Bryce, Руководство по сборке, Страница: 2 / 8

Congratula�ons on selec�ng a Playcra� Bryce pool table. Please contact us via email at
support@playcra�.com should you require any assistance.
*NOTE* - Your table arrives assembled through Step 5 below. Steps 1-5 are included in
the event billiard cloth or parts require replacing
Please carefully read all safety instruc�ons and direc�ons before proceeding
1) Your table is designed for use indoors in a climate controled environment only.
Damage can occur if the table is exposed to water, dampness, high humidity,
freezing temperatures, etc.
2) This pool table is heavy. Two or more people are required for assembly.
3) Only use the table for its intended purpose.
4) Damaged or worn parts may be dangerous for users and the integrity of the table.
Replace worn or damaged components immediately and do not use the table un�l any
issues have been resolved. For best results, use only spare parts supplied by Playcra�.
5) Unauthorized repairs or altering the table’s design or func�ons may be dangerous and
will void the warranty.
6) Check all screws, bolts, etc. on a regular basis to ensure that they are in good working
condi�on and have not loosened over �me.
7) Keep your table covered. If there is dust on the playfield or the aprons, use a vacuum
or wipe with a clean, so� cloth to remove. Do not sit on the table and do not use the
table outside.
8) DO NOT li� the table by placing your hands under the pockets, and do not sit, lean or
put pressure on the pockets.
9) Check that the leg bolts are �ght. When moving the table, li� table off of its legs and
place it down squarely on the legs, do not drag the table( and do not li� by the pockets.)
page 2