Playcore ultraPLAY uPLAY TODAY MADDIE'S CHASE UPLAY-006-N Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 86

background image

Issued/Revised:

GENERAL INTRODUCTION TO INSTALLATION INSTRUCTIONS

u

PLAY TODAY

800.458.5872

www.ultraplay.com

14

4/12/2018

7. CPSC guidelines mandate that there shall be no gaps present in the playground equipment that fall
    between 3-1/2" and 9". The positioning of certain components by the installer can affect this criteria,
    so you should always measure distances created when attaching components in order to avoid these
  spaces which can cause entrapment of a child using the equipment. Also, ASTM requires that no
  more than 2 threads of a bolt can protrude from the nut. Any excess threads should be filed down and
    made smooth to the touch.

8. When concrete is poured, be sure to keep the top 4" below grade, and sloped away from the post to
    promote good water drainage. Wash off any concrete that may have splashed onto the post before it
    dries. Allow all concrete to harden a minimum of 48 hours before allowing use.

SAFETY DURING INSTALLATION:

1. Before doing any excavation, inquire about any existing underground utilities.

2. Do not leave the job site unattended without making sure that all fastening hardware on all equipment
    is tightened and all drive rivets are in place to prevent clamps from moving, in case of unauthorized
  use. UPlayToday CLAMPS ARE NOT DESIGNED TO SUPPORT HUMAN WEIGHT WITHOUT THE
  DRIVE RIVETS INSTALLED, AND SUCH USE COULD CAUSE INJURY TO THE USER AND/OR
  DAMAGE TO THE EQUIPMENT. It is also strongly recommended that all installation areas be roped
    off with clearly marked warning signs posted. Any open footings should be covered with plywood or
  other suitable material. Even during installation, it has been found that children will use the unattended
equipment, thereby risking accidents.

3. If concrete footings and inground footers are being used, it is strongly recommended that the
    installation area should remain roped off for at least 48 hours after the last concrete footing is poured.
    Children should not be allowed to use the equipment during this period so that concrete has a chance
  to fully cure.

Finally, if you should have any questions regarding the proper installation of this equipment, please
contact UltraPlay at:

UPlayToday Customer Service
1675 Locust Street, Red Bud, IL 62278
1-800-458-5872 Fax 1-618-282-8202
Email: [email protected]

«
...
14
15
16
17
18
...
»

Содержание ultraPLAY uPLAY TODAY MADDIE'S CHASE UPLAY-006-N























































































Отзывы:

Нет отзывов

Похожие инструкции для ultraPLAY uPLAY TODAY MADDIE'S CHASE UPLAY-006-N

Бренд: 3M Страницы: 28

Бренд: Backyard Discovery Страницы: 79

Бренд: Bang & Olufsen Страницы: 2

Бренд: JB-Lighting Страницы: 40

Бренд: Backyard Play Systems Страницы: 74

Бренд: Malekko Страницы: 2

Бренд: Major Страницы: 26

Бренд: Waterpik Страницы: 2

Бренд: Rapid Shape Страницы: 12

Quest Enterprise Activity Unit QU10

Бренд: Play & Leisure Страницы: 6

Dance Cube 40401

Бренд: SHOWTEC Страницы: 13

Бренд: UEi Страницы: 3

Бренд: BVL Страницы: 92

Бренд: BAQ Страницы: 23

Бренд: Digi-Sense Страницы: 16

Бренд: Ivoclar Vivadent Страницы: 72

Бренд: LION Страницы: 7

Бренд: Europlay Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды