inexperienced users, we recommend that an attendant always be present. Instruct all
operators on the proper use of the chair features and the transfer procedure.
3. A lock pin is attached to the top of the cylinder to lock the chair in the fully raised position or
rotated 180° over the pool. Push the pin through the piston rod (lower hole) to lock the chair
in the fully raised position when the lift is not in use and/or when the water supply is turned
off. Use the 180° rotated lock pin hole (upper hole) to lock the chair in place when removing
the lift from the anchors.
4. To drain the water from the lift for storage: disconnect the water source, turn the control
valve to down, push the chair down, turn the control valve to up, and push the chair back up.
Repeating this step is necessary to get all of the water removed. This process will force the
water from the cylinder, valve and hoses.
6
800.791.8056
▪ www.spectrumproducts.com
