Playback MPS-3, Руководство пользователя

Страница: 5 / 23

MPS-5 User Manual
5
BEFORE USING THE PRODUCT
 What is in the box: MPS-5 playback system
Remote control unit with mounted batteries
USB-X extension interface
Optical duplex and USB cable used with USB-X
Power cord (110V versions only)
User manual
 Registration If you purchased this product from a dealer please take a moment and
send us an email to support@playbackdesigns.com so we can register you
for the warranty.
 Installation: The AC voltage supplied to the unit should match the voltage rating
indicated on the rear panel.
Do not place the player on the amplifier or any other equipment that
generates heat.
As the player may become warm during operation, always leave sufficient
space around the player for ventilation. Always allow adequate air
circulation around the player.
During operation, the disc rotates at high speed. Do not lift or move the
player while the disc is spinning. Doing so may damage the disc or the
player.
When moving the player, make sure to remove the disc and close the disc
tray. Then turn off the power and disconnect the power cord.
 Types of discs:
CDDA:
 12cm or 8cm discs
 16bit / 44.1kHz PCM digital audio
SACD:
 Single layer, dual layer or Hybrid
discs
 12cm or 8cm discs
 DSD digital audio
CD-R/RW discs recorded in Audio CD format and finalized correctly are
playable. But depending on the quality of the disc and the recording, some
CD-R/RW discs may not be playable. Discs that are not finalized cannot be
played.
The following discs cannot be played: DVD, CD-G, Data part of CD-
EXTRA, PHOTO CD, CD-ROM, DVD-ROM. Trying to play these discs may
result in loud noises and may damage your speakers and your hearing.
Warning: copy protected discs, DualDiscs and other discs that do not
conform to the CD or SACD standard may not play correctly in this player.
If you use such discs in this player, Playback Designs cannot be held
responsible for any consequences or guarantee the quality of reproduction.
Warning: Never use a stabilizer on the discs as they will damage the
mechanism and cause them to malfunction.